APLawrence.com -  Resources for Unix and Linux Systems, Bloggers and the self-employed

Unix, Xenix and ODT General FAQ

This article is from a FAQ concerning SCO operating systems. While some of the information may be applicable to any OS, or any Unix or Linux OS, it may be specific to SCO Xenix, Open This is an old article about SCO Unix hard drive bad blocks (badtrk) and is only left here for historical purposes. There is lots of Linux, Mac OS X and general Unix info elsewhere on this site: Search this site is the best way to find anything.

I have a bad block on my hard drive (Old Sco Unix)

You will see error messages going by giving you the sector, cylinder, head, and other nifty information regarding the error. If you can jot this down, it makes it much easier to find the bad block without having to scan the entire drive for it.

Shut the system down cleanly (using shutdown). If the error is on the root filesystem, boot from emergency floppies; otherwise, you can boot from the hard drive and enter single-user mode. The rule here is that the filesystem on which the error is located must not be mounted while you try to fix it.

(APL note: that's not necessary. Just be in single-user mode).

If you have a SCSI hard drive, use scsibadblk. It ships with Unix 3.2v4.1 and 3.2v4.2, and ODT 2.0 and 3.0. For Unix 3.2v4.0, install the 4.1 maintenance supplement or upgrade to 4.2 (not a bad idea anyway). For Unix 3.2.2 or ODT 1.1, install unx347a (no longer available). For Xenix 2.3.4, install xnx348a. For OSR5, scsibadblk was rolled into badtrk, so just use badtrk. For older versions of Xenix or Unix, you're out of luck. One other note about SCSI drives; many of them will automatically remap bad blocks, so when you go to run scsibadblk you will not actually find any bad blocks - even if you run a thorough scan of the area where the bad block was reported. This capability is called AWR/ARR. If you see a menu option called something like "Modify target parameters", you can enable and disable AWR and ARR.

If you're using a standard drive type (MFM, RLL, ATA, ESDI), use /etc/badtrk. I'd recommend doing a thorough, nondestructive scan of the area where the error message said there was a bad block.

Before doing this stuff, have a look at the manual for your specific operating system to see any notes or recommendations made by SCO. If you're not careful here, you might make things worse than they already are (such as by doing a destructive scan, which will wipe out all data on the area you scan).

Got something to add? Send me email.

(OLDER)    <- More Stuff -> (NEWER)    (NEWEST)   

Printer Friendly Version

-> (SCO Unix) I have a bad block on my hard drive

Printer Friendly Version

Have you tried Searching this site?

This is a Unix/Linux resource website. It contains technical articles about Unix, Linux and general computing related subjects, opinion, news, help files, how-to's, tutorials and more.

Contact us

Printer Friendly Version

What do such machines really do? They increase the number of things we can do without thinking. Things we do without thinking — there's the real danger. (Frank Herbert)



Unix/Linux Consultants

Skills Tests

Unix/Linux Book Reviews

My Unix/Linux Troubleshooting Book

This site runs on Linode