This article is from a FAQ concerning SCO operating systems. While some of the information may be applicable to any OS, or any Unix or Linux OS, it may be specific to SCO Xenix, Open Desktop or Openserver.

There is lots of Linux, Mac OS X and general Unix info elsewhere on this site: Search this site is the best way to find anything.

Unix (3.2v4.2) and ODT FAQ

How do I change my SCSI host adapter?

This applies to at least 3.2v4.0 and later. As always, make and verify a backup and a set of emergency diskettes before any major system surgery.

See also How can I install a new disk controller that requires a different driver?

Make sure that the appropriate driver is already installed. It may already be there, or it may be in the form of a BTLD. Your manual should provide the instructions for this step.

The file /etc/conf/cf.d/mscsi contains a list of SCSI devices and the parameters (such as which host adapter, what SCSI ID they are, etc.) required for them. The safest change to make is to replacec the name of the old adapter driver (e.g. ad for an Adaptec 154x) to the name of the new one (e.g. arad for an AIC-7770-based adapter) on each such line. There is another option, which is to use auto. I am not sure exactly how this works if there is more than one host adapter installed, so on systems with multiple host adapters it is probably wisest to list the specific host adapter rather than using auto.

In /etc/conf/sdevice.d you will find files named after the drivers you're installing and removing (e.g. ad and arad). You will need to edit each of them. The second column should be set to Y for a driver which is enabled, and N for a driver which is not. For some drivers, you will also need to edit the adapter address in columns 7 and 8; many adapters do not require this. There is no need to change /etc/conf/cf.d/sdevice, as it is built from these files when you relink the kernel.

There's at least one special case which deserves to be noted here. If you are moving from an EISA host adapter to a PCI one, you may need to enable PCI support in your kernel if this is the first PCI device. In /etc/conf/sdevice.d/pci, you should see a line which begins pci N. Change the N to Y. If you are removing your last EISA device, you may wish to do the inverse in /etc/conf/sdevice.d/eisarom with the eisarom line, though it probably doesn't hurt to have this support in the kernel even though you have no EISA devices. This also applies to other hardware changes involving addition or deletion of PCI and EISA devices, and it applies in reverse if you're removing your last PCI device and adding your first EISA one.

Relink the kernel, shut down, and swap the hardware.

Take Control of Your iPhone Apps

Jump to Comments

Many of the products and books I review are things I purchased for my own use. Some were given to me specifically for the purpose of reviewing them. I resell or can earn commissions from the sale of some of these items. Links within these pages may be affiliate links that pay me for referring you to them. That's mostly insignificant amounts of money; whenever it is not I have made my relationship plain. I also may own stock in companies mentioned here. If you have any question, please do feel free to contact me.

Specific links that take you to pages that allow you to purchase the item I reviewed are very likely to pay me a commission. Many of the books I review were given to me by the publishers specifically for the purpose of writing a review. These gifts and referral fees do not affect my opinions; I often give bad reviews anyway.

We use Google third-party advertising companies to serve ads when you visit our website. These companies may use information (not including your name, address, email address, or telephone number) about your visits to this and other websites in order to provide advertisements about goods and services of interest to you. If you would like more information about this practice and to know your choices about not having this information used by these companies, click here.