This article is from a FAQ concerning SCO operating systems. While some of the information may be applicable to any OS, or any Unix or Linux OS, it may be specific to SCO Xenix, Open Desktop or Openserver.

There is lots of Linux, Mac OS X and general Unix info elsewhere on this site: Search this site is the best way to find anything.

Unix (3.2v4.2) and ODT FAQ

How do I configure an EIDE drive to work on 3.2v4.x?

This is an ancient post with no relevance to modern systems.

This is a combination of TA 482436 and a procedure posted in comp.unix.sco.misc by a hardy adventurer. Use it at your own risk; it may not work with all hard drives, and you may not be able to have other OSes on your hard drive in some cases. Note also that there is an SLS, uod429a, which adds LBA support to 3.2v4.2, and should be used instead of this procedure where applicable.

OpenServer Release 5 is the first SCO operating system which supports LBA (Logical Block Addressing) mode, so to install on an older system the first thing you need to do is to disable this mode. This may involve jumpers or a BIOS setting change; check your hardware documentation.

Configure your BIOS to believe the hard drive has 1024 cylinders, 16 heads, and 63 sectors per track. Begin your installation, and make sure you run through the disk initialization section manually. Apparently, if you can select the "Preserve additional filesystems" option, this may be an easy way to do it. When you get the prompts dealing with the actual geometry of your hard drive (this program is dkinit), modify the current disk parameters, and set them to something larger. At 16 heads and 63 above) spt, every actual megabyte (1 048 576 bytes, or 1024 kB) of disk space takes about two cylinders; you could use this equivalence to calculate the number of cylinders you should enter. If in doubt, guess low; you do not want to have Unix trying to use disk space which isn't there.

When you've done this, you've basically told Unix to ignore the BIOS settings (which will be used only for booting), and that should lift the ~500 MB limit up to about a gig. Note that there is a limit of 2048 cylinders in SCO's hard drive drivers, which means you will not be able to access more than about a gigabyte.

SpamCheetah
Stop spam dead in its tracks!

Jump to Comments

Many of the products and books I review are things I purchased for my own use. Some were given to me specifically for the purpose of reviewing them. I resell or can earn commissions from the sale of some of these items. Links within these pages may be affiliate links that pay me for referring you to them. That's mostly insignificant amounts of money; whenever it is not I have made my relationship plain. I also may own stock in companies mentioned here. If you have any question, please do feel free to contact me.

Specific links that take you to pages that allow you to purchase the item I reviewed are very likely to pay me a commission. Many of the books I review were given to me by the publishers specifically for the purpose of writing a review. These gifts and referral fees do not affect my opinions; I often give bad reviews anyway.

We use Google third-party advertising companies to serve ads when you visit our website. These companies may use information (not including your name, address, email address, or telephone number) about your visits to this and other websites in order to provide advertisements about goods and services of interest to you. If you would like more information about this practice and to know your choices about not having this information used by these companies, click here.